There are several chapters in this textbook that will discuss Analysis of Variance for factorial or specialized designs. For a discussion of these chapters and the types of designs for which they are best suited refer to the section on Methods for Analysis of Variance. Note, however, that the General Linear Models chapter describes how to analyze designs with any number and type of between effects and compute ANOVAbased variance component estimates for any effect in a mixedmodel analysis.
Experimentation is sometimes mistakenly thought to involve only the manipulation of levels of the independent variables and the observation of subsequent responses on the dependent variables. Independent variables whose levels are determined or set by the experimenter are said to have fixed effects. There is a second class of effects, however, which is often of great interest to the researcher, Random effects are classification effects where the levels of the effects are assumed to be randomly selected from an infinite population of possible levels. Many independent variables of research interest are not fully amenable to experimental manipulation, but nevertheless can be studied by considering them to have random effects. For example, the genetic makeup of individual members of a species cannot at present be (fully) experimentally manipulated, yet it is of great interest to the geneticist to assess the genetic contribution to individual variation on outcomes such as health, behavioral characteristics, and the like. As another example, a manufacturer might want to estimate the components of variation in the characteristics of a product for a random sample of machines operated by a random sample of operators. The statistical analysis of random effects is accomplished by using the random effect model, if all of the independent variables are assumed to have random effects, or by using the mixed model, if some of the independent variables are assumed to have random effects and other independent variables are assumed to have fixed effects.
Properties of random effects. To illustrate some of the properties of random effects, suppose you collected data on the amount of insect damage done to different varieties of wheat. It is impractical to study insect damage for every possible variety of wheat, so to conduct the experiment, you randomly select four varieties of wheat to study. Plant damage is rated for up to a maximum of four plots per variety. Ratings are on a 0 (no damage) to 10 (great damage) scale. The following data for this example are presented in Milliken and Johnson (1992, p. 237).
DATA: wheat.sta 3v  

VARIETY  PLOT  DAMAGE 
A A A B B B B C C C C D D 
1 2 3 4 5 6 7 8 9 10 11 12 13 
3.90 4.05 4.25 3.60 4.20 4.05 3.85 4.15 4.60 4.15 4.40 3.35 3.80 
To determine the components of variation in resistance to insect damage for Variety and Plot, an ANOVA can first be performed. Perhaps surprisingly, in the ANOVA, Variety can be treated as a fixed or as a random factor without influencing the results (provided that Type I Sums of squares are used and that Variety is always entered first in the model). The Scrollsheet below shows the ANOVA results of a mixed model analysis treating Variety as a fixed effect and ignoring Plot, i.e., treating the plottoplot variation as a measure of random error.
ANOVA Results: DAMAGE (wheat.sta)  

Effect 
Effect (F/R) 
df Effect 
MS Effect 
df Error 
MS Error 
F 
p 
{1}VARIETY  Fixed  3  .270053  9  .056435  4.785196  .029275 
Another way to perform the same mixed model analysis is to treat Variety as a fixed effect and Plot as a random effect. The Scrollsheet below shows the ANOVA results for this mixed model analysis.
ANOVA Results for Synthesized Errors: DAMAGE (wheat.sta)  

df error computed using Satterthwaite method  
Effect 
Effect (F/R) 
df Effect 
MS Effect 
df Error 
MS Error 
F 
p 
{1}VARIETY {2}PLOT 
Fixed Random 
3 9 
.270053 .056435 
9  
.056435  
4.785196  
.029275  
The Scrollsheet below shows the ANOVA results for a random effect model treating Plot as a random effect nested within Variety, which is also treated as a random effect.
ANOVA Results for Synthesized Errors: DAMAGE (wheat.sta)  

df error computed using Satterthwaite method  
Effect 
Effect (F/R) 
df Effect 
MS Effect 
df Error 
MS Error 
F 
p 
{1}VARIETY {2}PLOT 
Random Random 
3 9 
.270053 .056435 
9  
.056435  
4.785196  
.029275  
As can be seen, the tests of significance for the Variety effect are identical in all three analyses (and in fact, there are even more ways to produce the same result). When components of variance are estimated, however, the difference between the mixed model (treating Variety as fixed) and the random model (treating Variety as random) becomes apparent. The Scrollsheet below shows the variance component estimates for the mixed model treating Variety as a fixed effect.
Components of Variance (wheat.sta)  

Mean Squares Type: 1  
Source  DAMAGE 
{2}PLOT Error 
.056435 0.000000 
The Scrollsheet below shows the variance component estimates for the random effects model treating Variety and Plot as random effects.
Components of Variance (wheat.sta)  

Mean Squares Type: 1  
Source  DAMAGE 
{1}VARIETY {2}PLOT Error 
.067186 .056435 0.000000 
As can be seen, the difference in the two sets of estimates is that a variance component is estimated for Variety only when it is considered to be a random effect. This reflects the basic distinction between fixed and random effects. The variation in the levels of random factors is assumed to be representative of the variation of the whole population of possible levels. Thus, variation in the levels of a random factor can be used to estimate the population variation. Even more importantly, covariation between the levels of a random factor and responses on a dependent variable can be used to estimate the population component of variance in the dependent variable attributable to the random factor. The variation in the levels of fixed factors is instead considered to be arbitrarily determined by the experimenter (i.e., the experimenter can make the levels of a fixed factor vary as little or as much as desired). Thus, the variation of a fixed factor cannot be used to estimate its population variance, nor can the population covariance with the dependent variable be meaningfully estimated. With this basic distinction between fixed effects and random effects in mind, we now can look more closely at the properties of variance components.
To index 
A good way to illustrate the nature of variance components is to generate a data set with known variance components, and then to "extract" (estimate) those components via the Variance Components and Mixed Model ANOVA/ANCOVA module. Make a new data file with 2 variables and 500 cases. Then write the following STATISTICA BASIC program:
NoGroups:=50; NoCases:=500; NPerGroup:=NoCases/NoGroups; redim RandomEffects(NoGroups); for ilevel:=1 to NoGroups do RandomEffects(ilevel):=Normal(2); error:=1; for i:=1 to ncases do begin ilevel:=trunc((i1)/NPerGroup)+1; data(i,1):=ilevel; data(i,2):=RandomEffects(ilevel) +Normal(error); end; 
{ This array will contain the } { random effects of the respective } { levels on the dependent variable } { Here the random effects are generated } { from a normal distrib. with sigma = 2 } { i.e., sigmasquared (variance) = 4 } { Sigma (and variance) for error will be 1 } { This line makes the consecutive } { integer codes: codes are 150, n=10 } { Put codes into the first variable } { Generate the dependent variable values: } { y(i)=RandomEffects(ilevel) + random error } 
This program will put code values from 1 to 50 into the first variable of the data file. These codes will identify 50 samples of 10 observations each. Note how at the beginning of the program, the random effects are created as normal random numbers with a standard deviation of 2, or a variance of 2 * 2 = 4. The error component is produced as a normal random variable with a standard deviation of 1 (and variance of 1). The dependent variable values are then computed as the sums of two independent normal random numbers: one for the error and one for the random effect (i.e., the random number for the respective level of the random effect).
When you analyze the data created in this manner, treating variable 1 as a random factor, and then compute the variance components (choose any method of estimation), then you will see estimates that are usually close to 4 for the random factor, and 1 for the error.
It can be very instructive to "play" with this program, for example, to create fewer groups (e.g., three). You will see that the resulting estimates from the analyses will very quickly deviate substantially from the values that were "plugged in" (i.e., 4 and 1). This illustrates the unreliability of the estimates of the variance components, due to their large sampling errors, when there are only a few levels. You can use this program to explore the relation between the numbers of levels of random factors, and the reliability of the estimates.
To index 
The basic goal of variance component estimation is to estimate the population covariation between random factors and the dependent variable. Depending on the method used to estimate variance components, the population variances of the random factors can also be estimated, and significance tests can be performed to test whether the population covariation between the random factors and the dependent variable are nonzero.
Estimating the variation of random factors. The ANOVA method provides an integrative approach to estimating variance components, because ANOVA techniques can be used to estimate the variance of random factors, to estimate the components of variance in the dependent variable attributable to the random factors, and to test whether the variance components differ significantly from zero. The ANOVA method for estimating the variance of the random factors begins by constructing the Sums of squares and cross products (SSCP) matrix for the independent variables. The sums of squares and cross products for the random effects are then residualized on the fixed effects, leaving the random effects independent of the fixed effects, as required in the mixed model (see, for example, Searle, Casella, & McCulloch, 1992). The residualized Sums of squares and cross products for each random factor are then divided by their degrees of freedom to produce the coefficients in the Expected mean squares matrix. Nonzero offdiagonal coefficients for the random effects in this matrix indicate confounding, which must be taken into account when estimating the population variance for each factor. For the wheat.sta data, treating both Variety and Plot as random effects, the coefficients in the Expected mean squares matrix show that the two factors are at least somewhat confounded. The Expected mean squares Scrollsheet is shown below.
Expected Mean Squares (wheat.sta)  

Mean Squares Type: 1  
Source 
Effect (F/R) 
VARIETY 
PLOT 
Error 
{1}VARIETY {2}PLOT Error 
Random Random 
3.179487 
1.000000 1.000000 
1.000000 1.000000 1.000000 
The coefficients in the Expected mean squares matrix are used to estimate the population variation of the random effects by equating their variances to their expected mean squares. For example, the estimated population variance for Variety using Type I Sums of squares would be 3.179487 times the Mean square for Variety plus 1 times the Mean square for Plot plus 1 times the Mean square for Error.
The ANOVA method provides an integrative approach to estimating variance components, but it is not without problems (i.e., ANOVA estimates of variance components are generally biased, and can be negative, even though variances, by definition, must be either zero or positive). An alternative to ANOVA estimation is provided by maximum likelihood estimation. Maximum likelihood methods for estimating variance components are based on quadratic forms, and typically, but not always, require iteration to find a solution. Perhaps the simplest form of maximum likelihood estimation is MIVQUE(0) estimation. MIVQUE(0) produces Minimum Variance Quadratic Unbiased Estimators (i.e., MIVQUE). In MIVQUE(0) estimation, there is no weighting of the random effects (thus the 0 [zero] after MIVQUE), so an iterative solution for estimating variance components is not required. MIVQUE(0) estimation begins by constructing the Quadratic sums of squares (SSQ) matrix. The elements for the random effects in the SSQ matrix can most simply be described as the sums of squares of the sums of squares and cross products for each random effect in the model (after residualization on the fixed effects). The elements of this matrix provide coefficients, similar to the elements of the Expected Mean Squares matrix, which are used to estimate the covariances among the random factors and the dependent variable. The SSQ matrix for the wheat.sta data is shown below. Note that the nonzero offdiagonal element for Variety and Plot again shows that the two random factors are at least somewhat confounded.
MIVQUE(0) Variance Component Estimation (wheat.sta)  

SSQ Matrix  
Source  VARIETY  PLOT  Error  DAMAGE 
{1}VARIETY {2}PLOT Error 
31.90533 9.53846 9.53846 
9.53846 12.00000 12.00000 
9.53846 12.00000 12.00000 
2.418964 1.318077 1.318077 
Restricted Maximum Likelihood (REML) and Maximum Likelihood (ML) variance component estimation methods are closely related to MIVQUE(0). In fact, in the program, REML and ML use MIVQUE(0) estimates as start values for an iterative solution for the variance components, so the elements of the SSQ matrix serve as initial estimates of the covariances among the random factors and the dependent variable for both REML and ML.
To index 
Components of Variance (wheat.sta)  

Mean Squares Type: 1  
Source  DAMAGE 
{1}VARIETY {2}PLOT Error 
0.067186 0.056435 0.000000 
MIVQUE(0) variance components are estimated by inverting the partition of the SSQ matrix that does not include the dependent variable (or finding the generalized inverse, for singular matrices), and postmultiplying the inverse by the dependent variable column vector. This amounts to solving the system of equations that relates the dependent variable to the random independent variables, taking into account the covariation among the independent variables. The MIVQUE(0) estimates for the wheat.sta data are listed in the Scrollsheet shown below.
MIVQUE(0) Variance Component Estimation (wheat.sta)  

Variance Components  
Source  DAMAGE 
{1}VARIETY {2}PLOT Error 
0.056376 0.065028 0.000000 
REML and ML variance components are estimated by iteratively optimizing the parameter estimates for the effects in the model. REML differs from ML in that the likelihood of the data is maximized only for the random effects, thus REML is a restricted solution. In both REMLandMLestimation, an iterative solution is found for the weights for the random effects in the model that maximize the likelihood of the data. The program uses MIVQUE(0)) estimates as the start values for both REML and ML estimation, so the relation between these three techniques is close indeed. The statistical theory underlying maximum likelihood variance component estimation techniques is an advanced topic (Searle, Casella, & McCulloch, 1992, is recommended as an authoritative and comprehensive source). Implementation of maximum likelihood estimation algorithms, furthermore, is difficult (see, for example, Hemmerle & Hartley, 1973, and Jennrich & Sampson, 1976, for descriptions of these algorithms), and faulty implementation can lead to variance component estimates that lie outside the parameter space, converge prematurely to nonoptimal solutions, or give nonsensical results. Milliken and Johnson (1992) noted all of these problems with the commercial software packages they used to estimate variance components.
The basic idea behind both REML and ML estimation is to find the set of weights for the random effects in the model that minimize the negative of the natural logarithm times the likelihood of the data (the likelihood of the data can vary from zero to one, so minimizing the negative of the natural logarithm times the likelihood of the data amounts to maximizing the probability, or the likelihood, of the data). The logarithm of the REMLlikelihood and the REML variance component estimates for the wheat.sta data are listed in the last row of the Iteration history Scrollsheet shown below.
Iteration History (wheat.sta)  

Variable: DAMAGE  
Iter.  Log LL  Error  VARIETY  
1 2 3 4 5 6 7 
2.30618 2.25253 2.25130 2.25088 2.25081 2.25081 2.25081 
.057430 .057795 .056977 .057005 .057006 .057003 .057003 
.068746 .073744 .072244 .073138 .073160 .073155 .073155 
The logarithm of the MLlikelihood and the ML estimates for the variance components for the wheat.sta data are listed in the last row of the Iteration history Scrollsheet shown below.
Iteration History (wheat.sta)  

Variable: DAMAGE  
Iter.  Log LL  Error  VARIETY  
1 2 3 4 5 6 
2.53585 2.48382 2.48381 2.48381 2.48381 2.48381 
.057454 .057427 .057492 .057491 .057492 .057492 
.048799 .048541 .048639 .048552 .048552 .048552 
As can be seen, the estimates of the variance components for the different methods are quite similar. In general, components of variance using different estimation methods tend to agree fairly well (see, for example, Swallow & Monahan, 1984).
To index 
To test the significance of effects in mixed or random models, error terms must be constructed that contain all the same sources of random variation except for the variation of the respective effect of interest. This is done using Satterthwaite's method of denominator synthesis (Satterthwaite, 1946), which finds the linear combinations of sources of random variation that serve as appropriate error terms for testing the significance of the respective effect of interest. The Scrollsheet below shows the coefficients used to construct these linear combinations for testing the Variety and Plot effects.
Denominator Synthesis: Coefficients (MS Type: 1) (wheat.sta)  

The synthesized MS Errors are linear combinations of the resp. MS effects 

Effect  (F/R)  VARIETY  PLOT  Error 
{1}VARIETY {2}PLOT 
Random Random 

1.000000 
1.000000 
The coefficients show that the Mean square for Variety should be tested against the Mean square for Plot, and that the Mean square for Plot should be tested against the Mean square for Error. Referring back to the Expected mean squares Scrollsheet, it is clear that the denominator synthesis has identified appropriate error terms for testing the Variety and Plot effects. Although this is a simple example, in more complex analyses with various degrees of confounding among the random effects, the denominator synthesis can identify appropriate error terms for testing the random effects that would not be readily apparent.
To perform the tests of significance of the random effects, ratios of appropriate Mean squares are formed to compute F statistics and p levels for each effect. Note that in complex analyses the degrees of freedom for random effects can be fractional rather than integer values, indicating that fractions of sources of variation were used in synthesizing appropriate error terms for testing the random effects. The Scrollsheet displaying the results of the ANOVA for the Variety and Plot random effects is shown below. Note that for this simple design the results are identical to the results presented earlier in the Scrollsheet for the ANOVA treating Plot as a random effect nested within Variety.
ANOVA Results for Synthesized Errors: DAMAGE (wheat.sta)  

df error computed using Satterthwaite method  
Effect 
Effect (F/R) 
df Effect 
MS Effect 
df Error 
MS Error 
F 
p 
{1}VARIETY {2}PLOT 
Fixed Random 
3 9 
.270053 .056435 
9  
.056435  
4.785196  
.029275  
As shown in the Scrollsheet, the Variety effect is found to be significant at p < .05, but as would be expected, the Plot effect cannot be tested for significance because plots served as the basic unit of analysis. If data on samples of plants taken within plots were available, a test of the significance of the Plot effect could be constructed.
Appropriate tests of significance for MIVQUE(0) variance component estimates generally cannot be constructed, except in special cases (see Searle, Casella, & McCulloch, 1992). Asymptotic (large sample) tests of significance of REML and ML variance component estimates, however, can be constructed for the parameter estimates from the final iteration of the solution. The Scrollsheet below shows the asymptotic (large sample) tests of significance for the REML estimates for the wheat.sta data.
Restricted Maximum Likelihood Estimates (wheat.sta)  

Variable: DAMAGE 2*Log(Likelihood)=4.50162399 

Effect 
Variance Comp. 
Asympt. Std.Err. 
Asympt. z 
Asympt. p 
{1}VARIETY Error 
.073155 .057003 
.078019 .027132 
.937656 2.100914 
.348421 .035648 
The Scrollsheet below shows the asymptotic (large sample) tests of significance for the ML estimates for the wheat.sta data.
Maximum Likelihood Estimates (wheat.sta)  

Variable: DAMAGE 2*Log(Likelihood)=4.96761616 

Effect 
Variance Comp. 
Asympt. Std.Err. 
Asympt. z 
Asympt. p 
{1}VARIETY Error 
.048552 .057492 
.050747 .027598 
.956748 2.083213 
.338694 .037232 
It should be emphasized that the asymptotic tests of significance for REML and ML variance component estimates are based on large sample sizes, which certainly is not the case for the wheat.sta data. For this data set, the tests of significance from both analyses agree in suggesting that the Variety variance component does not differ significantly from zero.
For basic information on ANOVA in linear models, see also Elementary Concepts.
To index 
To index 